SUPPLY SET
INCLUDES
Gas hob
1 pcs.
Mounting kit
1 pcs.
Operating manual
1 pcs.
Kit for switching to liquefied gas
1 pcs.
Warranty card
1 pcs.
Packaging
1 pcs.
ATTENTION!
DISCONNECT THE HOB FROM ELECTRIC NETWORK BEFORE CHECKOUT,
MAINTENANCE, ETC.
ATTENTION!
THE HOB MUST BE INSTALLED AND USED IN ROOMS WITH CONSTANT
VENTILATION
6.1.
This section is intended for skilled technicians and contains instructions for installing and servicing the hob according
to the current safety regulations.
6.2.
To ensure the normal operation of the hob, as well as compliance with safety regulations, the following requirements
must be met:
-
Room must have ventilation system, sufficient for the removal of combustion products.
-
Fresh air must be in the room for proper combustion. The inflow of air must be at least 2 m
3
/hour per kilowatt of installed
equipment.
-
Liquefied gas is heavier than air and therefore accumulates below. Rooms, in which liquefied gas cylinders are installed,
must be equipped with external ventilation so that gas can flow through it in case of leakage.
-
It is not possible to install and store cylinders with gas in premises below the floor level (in basements and
semibasements).
-
It is recommended to keep in the kitchen only the used cylinder and install it away from sources of heat (ovens, fireplaces,
stoves, etc.) that can heat the cylinder to a temperature above 50ºС.
6.3.
Gas hobs have an appropriate degree of protection against overheating of type X, so they can be installed next to
furniture, the height of which does not exceed the height of the working surface.
6.4.
The tabletop, on which the hob is installed, must withstand a temperature of 100°С.
6.5.
The wall behind the gas hob must be lined with heat-resistant material (ceramic tile, etc.).
6.6.
If the distance between bodies of the wall cabinet is larger than the width of the hob, the height of the mounting
cabinet must be not less than 400 mm.
6.7.
If the distance between bodies of the wall cabinets is equal to the width of the hob, then the height of the cabinets’
mounting must be not less than 530 mm.
6.8.
In case of mounting the hood over the hob, you must adhere to the recommended height, specified in the operating
manual for the hood.
6.9.
Dimensions of the hob and mounting hole are shown in the picture
6
.
INSTRUCTIONS FOR INSTALLATION
OF
THE
HOB
.
