Maintenance Symbol Definition
The following symbols are
used in this manual for
helping the reader understand the intent of this
specification. If one or several symbols are marked in
front of the maintenance procedure, it is defined as
follows:
Indicate the tools for carrying out this
operation
Indicate new parts for carrying out this
operation
Indicate the motor must be stopped before
carrying out the operation
Indicate the motor must be started before
carrying out the operation
Indicate that this operation must be carried
out by the supplier
Maintenance Schedule
There are five types of repair & inspection to be
carried out according to the schedule: Every day,
every quarter, every six months, every year and every
two years. With consideration to the repeated
procedures, the “Regular Repair Procedure Section”
and the “Repair & Inspection Report” shall be
classified into five sections- A, B, C, D and E. The
necessary procedure combination for regular
inspection shall be determined according to the
following table.
Inspection Interval Inspection Procedures
Every day or every 8 hours A
Every quarter or every 250 hours A+B
Every half a year or every 500 hours A+B+C
Every year or every 1,000 hours A+B+C+D
Every two years or every 2,000 hours A+B+C+D+E
Repair & Inspection Report
The repair & inspection report shall include the
inspection table of each regular inspection.
Duplicate the repair & inspection report for each
inspection. Store the completed tables by over three
years.
Attention
6
GTJZ0407SE
Maintenance Manual
