Elettrotest 99112103, Руководство пользователя

Страница: 16 / 69

02/02/22 User Manual CPS/M 62000584_05 16
2. NOTES FOR USERS
2.1 Switching ON
As soon as CPS/M switches on, through the switch placed on the control panel of the machine, it
makes different cycles of test, indicated by the progression of the numbers from 0 to 9 on the
displays.
In case of bad working the test stops and the machine indicates on the control panel the type of
alarm checked (see at the voice alarms).
When the test ends CPS/M is set to 0 Volt in the range 300 Volt, 50 Hertz and regulation on the
output terminals (2 wires).
After the appearing of those indications, your CPS/M is ready to work.
2.2 PARAMETERS PROGRAMMING MODE
Allows you to change various generator start parameters through the programming mode.
The programming mode allows you to configure a starting profile of the application, different from
the factory one.
The modifiable parameters and how to access the programming mode are illustrated in the
Parameters Manual, you can find it
here or in the USB-Key supplied with your CPS/M.
2.3 VOLTAGE MENU