Ⓒ
elero GmbH
EN | 17
Setting twilight threshold
Level 0
The twilight function is switched o
ff
Factory settings
Level 1
Moving down at darkness
Level 15
Moving down at the start of twilight
The procedure for determination of the desired twilight
threshold is done by setting, observing and, if required, cor-
recting a selected setting.
• If the brightness measured by the light sensor is under-
cut for more than 10 minutes in relations to the chosen
twilight threshold, the roller shutter moves down all the
way to the lower end position.
The roller shutter will not automatically move back to the top
end position - via the Lumo-868.
The roller shutter must be manually opened with the
UP
button at the Lumo-868, a timer or another programmed
radio transmitter.
2.8.5 Encoding switch setting for regular operation
Important:
For regular operation (outside of any setting mode), the
encoding switches 1 and 2 must be set to OFF!
Encoding switch setting in regular operation
1 2 3 4
ON
OFF
X X X X
X
Lower position (
OFF
):
Setting mode o
ff
