Ⓒ
elero GmbH
EN | 9
2.4
Group control unit
A group is understood to mean the control of several radio
receivers at the same time. The selected group is controlled
by a travel command.
You can program any number of radio receivers in each
radio transmitter.
2.5 Commissioning
• The prerequisite for commissioning of the Lumo-868 is an
inserted functional battery (as in the delivery condition).
When the battery is discharged, replace it with a model of
the same type as described in chapter 2.11.
• Attaching to a suitable window position. For this, moisten
the location a little if required.
• Activate the Lumo-868 with any button; the status display
lights up.
Important
:
Do not push the
STOP
-/
P
-button before the radio receiver
is ready for programming. In learning mode, the Lumo-868
chooses a radio system (uni- or bidirectional). When the ra-
dio receiver is not in learning mode, the Lumo-868 switches
to unidirectional mode.
To reach the starting condition again, push the 3 operat-
ing buttons
UP, STOP
-/
P
and
DOWN
at the same time for
6 seconds until the status display lights up brie
fl
y.
2.5.1 Meanings of the status display
A radio signal is indicated by lighting up of the status dis-
play. The various colours of the status display mean:
