Ⓒ
elero GmbH
EN | 19
In order to achieve a high sensitivity of the glass breakage
sensor, mount the Lumo-868 so that the script is horizontal
(in parallel with the window sill).
A low sensitivity can be reached by attaching it swapped by
180° (
elero
script upside-down).
When the glass breakage sensor is shaken (e.g. because
window pane breaks), the glass breakage sensor is acti-
vated and causes the roller shutter to move to the lower end
position.
In this case, all automatic switching commands of a radio
transmitter programmed for the roller shutter (hand-held
transmitter, wall-mounted transmitter or timer) are blocked.
Manual operation is possible at any time, however.
The block of the automatic running commands is revoked
by a manual running command at a radio transmitter pro-
grammed for the roller shutter.
2.8.7 No function (encoding switch 4)
Encoding switch 4 is without function, any position.
2.9
Deleting the programmed sensor
The communication of the Lumo-868 with a radio receiver
(e.g. drive) is permanently deleted.
• Push the buttons
UP
,
DOWN
;
STOP
and
P
concurrently
for at least 6 seconds
The status display
fl
ashes brie
fl
y.
The Lumo-868 is deleted from the radio receiver/s.
2.10 Replacing the battery
The Lumo-868 is supplied with power via a lithium button
cell of type CR-2032 with 3 V. When the battery is
fl
at, the
Lumo-868 switches o
ff
automatically. A weak battery is
indicated by a weaker status display.
