use with a DMX console which can access the playback modes instantly.
5.3.3 ID
ID
The ID mode sets the C1’s start address for the incoming DMX data. See the DMX section for details.
5.3.4 Resolution
res
The Resolution mode sets the C1’s DMX resolution. See the DMX section for details.
5.3.5 Brightness
brt
The C1 has a brightness level ranging from 1 (dimmest) to 10 (brightest). This can be used to match the
system output to low ambient light levels.
5.3.6 Red, Green, and Blue Balance
rb, gn, bb
These three modes offer the ability to adjust the white balance color of the output by decreasing the
ouput for each primary LED color (Red, Green, and Blue). The default maximum level for each color is 63.
The range of possible values is from 0 – 63.
5.3.7 Firmware
F
This mode displays the current firmware version of the C1. The UP (Λ) and DOWN (V) buttons have no
effect in this mode.
5.3.8 Link (Master / Slave)
Lnk
The Link mode sets the type of control the Versa DRIVE has over a system.
mMs
(Master),
SLA
(Slave), and
0FF
(OFF) are the three options. See the Link (Master / Slave) section for details.
Revised July 18, 2006
Versa DRIVE C1
Page 9 of 16
User Manual
Содержание Versa Drive C1
Страница 1: ...Versa DRIVE C1 User Manual July 18 2006 ...