1. Introduction
The Versa® DRIVE C1 is a stand-alone controller for Versa TILE and Versa TUBEs. AVI or BMP based patterns are
combined with a pixel map in the RasterMAPPER™ software application, saved onto a Compact Flash card, and
loaded into the C1. Playback is via front panel controls, DMX, or contact closure.
2. Quick Start
1.
Connect Power & Data Cables. Use the Local or Serial Data output to connect to your Versa TILE or TUBE
system.
2.
Create a map of your system in RasterMAPPER.
3.
Import .AVI videos or .BMP still images into RasterMAPPER to create patterns.
4.
Output the patterns as .CFF files and store them on a Compact Flash (CF) card.
5.
Insert the CF card into the C1 and turn the power on.
6.
Use the MODE, UP (Λ), and DOWN (V) buttons to select different patterns and playback modes.
3. General Information
3.1 Front Panel
888
Versa DRIVE C1
COM PACT FLASH
M ODE
UP
DOWN
POWER
The Versa DRIVE C1 has the following controls and displays on its front panel:
•
Three function buttons: MODE, UP (Λ) and DOWN (V)
•
Compact Flash Card Slot
•
3 Digit Numeric LED Display
•
POWER switch
Revised July 18, 2006
Versa DRIVE C1
Page 3 of 16
User Manual
Содержание Versa Drive C1
Страница 1: ...Versa DRIVE C1 User Manual July 18 2006 ...