Elektron MULTISPOT M20, Руководство по эксплуатации

Страница: 21 / 24

- 21 -
6.7 Fixing sheet metal parts (tacking)
Body sections frequently have to be fixed temporarily for the pur-
pose of alignment. In some areas, clamps cannot be used. In
such cases, the sections can be fixed by tack welding with the
MULTISPOT M20. Washers from which ¼ has been cut out can
be used as fixing aid.
 Insert contact piece (40) for washers into welding gun (33) to
limit stop.
 Properly tighten union nut.
 Cut off approx. ¼ of a washer of 8 mm Ø with a side cutter.
 Insert prepared washer into contact piece (40).
 Select "washer weld" with keys CD.
 Position the washer and press-on.
 Press and keep hold of button (34) of the gun until end of au-
tomatic welding program.