Elektron MULTISPOT M20, Руководство по эксплуатации

Страница: 11 / 24

- 11 -
6.1 Pulling-out dents with washer
 Grind the damaged area to a bright metal finish.
 Insert contact piece (40) into welding gun.
 Select "washer" mode with keys CD.
 Fine-/– with keys GH, if necessary.
 Position welding gun (33) with washer in the area of the
dent.
 Press button (34) of the gun.
 Hook pulling tool into the washer (41) and carefully beat out
the dent.
 Remove washer by twisting. Only twist the washer off, other-
wise holes in the sheet steel could result.
8 mm Washer
Always beat out major dents from the outside, working in-
wards.
Use bright washers instead of galvanized. Adjust setting
with keys GH according to size and type of the dent, if ne-
cessary.



