Elektron MULTISPOT M20, Руководство по эксплуатации

Страница: 19 / 24

- 19 -
6.6 Welding-on T-pins
For example T-pins used for fixing trim strips, can be welded on
using contact pieces TST 3 (45) and TST 5 (52).
Incorporated in the tip of the contact piece is a magnet which
holds the T-pin during the welding process.
Special fittings are available for welding works on roof areas
of the vehicle types Golf 2, Golf 3, Vento, Porsche 944 and
Passat B3. These fittings permit accurate welding on of the
T-pins exactly at the points specified by the vehicle manu-
facturers.
For item numbers please see accessories list!
Welding procedure:
 Grind welding area to a bright metal finish.
 Select appropriate contact piece and insert until limit stop into
welding gun (33).
 Thoroughly tighten union nut.
 Select "T-pin" mode with keys CD.
 Insert head of T-pin into tip of contact piece.
 Select welding position and press-on welding gun (33).
 Press and keep hold of button (34) of gun until end of wel-
ding program. (Time adjust with keys GH)

