Elektron MULTISPOT M20, Руководство по эксплуатации

Страница: 13 / 24

- 13 -
6.2 High-speed planishing hammer "SAH"
(special accessory)
Small dents, scratches or hail pitting can easily be removed with
the high-speed planishing hammer (42).
 Grind damaged area to a bright metal finish.
 Insert high-speed planishing hammer (42) (with weld on tip)
into the gun.
 Properly tighten union nut.
 Select "SAH" mode with keys CD.
 Fine-adjust welding time with keys GH, if necessary. Select
the weld time as short as possible.
 Position weld-on tip of the hammer (42) in the damaged area.
 Press button (34) of the gun and weld-on welding tip.
 Beat out the dent.
 Twist the high-speed planishing hammer (SAH) off the sheet
steel.
 From time to time, dress the weld-on tip with a file.
Repeat the procedure until the damaged area is entirely re-
paired.
Heavy dents only remove with extractor tool and 8mm was-
her, as otherwise the welding gun might be damaged!
If the weld-on tip is worn out, it should be replaced.
For replacement unscrew the socket-head cap screw at the
top of the hammer (SAH) and remove the worn out weld-on
tip. Position new weld-on tip and properly tighten socket-
head capscrew!
For item number please see spare parts list.





