Elektron MULTISPOT M20, Руководство по эксплуатации

Страница: 17 / 24

- 17 -
6.5 Welding-on threaded studs
With the MULTISPOT M20 it is possible to weld on threaded
studs of 4, 5, 6 mm diameter.
Please use the appropriate contact pieces!
SB 4 for Ø 4 mm
SB 5 for Ø 5 mm
 Insert appropriate contact piece (44) into welding gun (33).
 Properly tighten union nut.
 Insert threaded stud into contact piece (44) until limit stop.
 Select "weld on studs" mode with keys CD.
 Position welding gun (33) with the stud at the welding point
and press slightly.
 Press and keep hold of button (34) of the gun until welding
program has ended. – (Time adjust with keys GH)
Threaded studs without collar can also be welded on. Use a nut
in place of a collar. The part to be welded should project from the
nut about 1 to 2 mm. Welding procedure as described above.