23
Operate the
Midi Buffet STD
®
(after waiting 2 hrs.)
You may either use the machine on the palette or use it on its footers. To do so, please
remove the machine from the pallet and use the Wheeled Footers.
Adjust the Settings and Set Prices according to your requirements.
Please use Plastic Product Pushers for proper vending if needed. Some small thin products
may require this extra push the Plastic Pushers provide. The Plastic Pushers to be fixed to
the Spirals. (You may also use adhesive to make a stronger bonding)
The
Midi Buffet STD
®
is being delivered fixed on a pallet. The
Midi Buffet STD
®
can
either be used on its pallet or on its wheeled footers after being placed on a location carried using
a fork lift or a pump truck.
The Wheeled Base Assembly is for easy relocation on the floor. It is not suggested to use the
Midi Buffet STD
®
on the Wheel Assembly for long durations.
After removal of packing materials the Vending Machine has to be checked if any damages have
occurred during transportation. These checks can be the overall look for any physical damages,
whether trays are in their positions or not, the control panel is closed or not etc. (Chapter 2 Main
Units).
The power cable for mains connection is supplied with the
Midi Buffet STD
®
. The Vending
Machine has to be connected to Mains to start operation.
Before proceeding with Product Loading and Price Setting it is suggested that the main functions
are controlled from the Machine Test Menu (Chapter 4.2.4).
Only operate the Vending Machine on Norm Earthed Mains Supply.
Vending Machines with Cooling Unit;
There must be min. 10 cm space between the back side of the Vending
Machine and the Wall.
The Vending machine must not be operated for 2 hours after transportation.
If the Upright (Vertical) Position of the Vending Machine has not been kept
during transportation, the waiting period before use should not be less than
3 hours. The VM must not operate under direct sunlight.
