13
2.3 Coin Return Push Button
This button is used for getting the change after shopping. After pressing this
button change can be collected from the Coin Return Chute.
2.4 Coin Entry Slot
This entry slot is used for inserting coins into Vending Machine. Coins are being
placed into the slot then simply being pushed upwards.
Inserted coin value can be seen on the screen. If the inserted coin is not defined
or is an imitation then the coin drops down to the Coin Return Chute and is not
accepted.
2.5 Coin Return Chute
This chute is for the change and/or coins which cannot be validated.
Coins can be collected after falling into the return chute.
2.6 Cash Box
Cash Box is where accepted coins are collected (excess money over tubes). For
increased security the cash box has a padlock.
The cash box has to be checked and emptied periodically or the cash box can be
filled up with coins and coins may drop around which may cause problems.
2.7 Electronic Modules
Midi Buffet STD is fully microprocessor controlled and the electronic modules in
use are as follows:
a) Power distribution board electronic module: This module is used for distributing
energy to the Vending Machine. With its two fuse control this unit helps preventing possible
electrical problems which may be caused by other electronic modules or the optional cooling unit
and it provides increased safety.
b) Power Supply Module: This module is to provide DC Voltage.
c) Main Electronic Module: All functions of the Midi Buffet STD Vending Machine are being
controlled by this Module.
d) Capacitive Touchpad Keypad
e) Graphical LCD Screen
f) IR Product Sensor: This module is used for checking the Proper Physical Vending Process. If
there is no real vend then the credit will remain so that another product can be selected or the
credit can be taken. (Chapter 4.2.1.2)
g) Illumination electronic module.
Please contact our Technical Service for any failures on electronic modules.
