22
4.2.4.6 Relay Control
This menu is for checking the Relay Controls of the Cooling Unit. Relay controls are as follows;
1st Relay can be opened using Nr. 1 Key and Closed Using Nr. 4 Key,
2nd Relay can be opened using Nr. 2 Key and Closed Using Nr. 5 Key,
3
rd
Relay (Optional) can be opened using Nr. 3 Key and Closed Using Nr. 6 Key
4.2.5 Accessories Main Menu
4.2.5.1 Alarm
This menu is used for activating or deactivating the alarm against unauthorized access (Without
Password Entry) to Door Opening (Please check Chapter 3. VENDING SAFETY).
4.2.5.3 GSM/GPRS (optional)
This menu is for GSM/GPRS module settings.
4.2.5.4 Impact Sensor
This menu is used for activating or deactivating the Impact Sensor against Vandalism as an
increased safety precaution.
4.2.6 Machine Information
In this menu, machine tracing number, software version etc. information can be found.
5. TECHNICAL FEATURES and ENERGY EFFICIENCY
Electricity (With Cooling):
220 VAC ±%10 50 Hz
Electricity (Without Cooling): 90-260 VAC 50-60 Hz
(Norm Earthed Mains Supply is necessary)
Power Consumption (With Cooling): 500 W (Total Daily Consumption/24 h)
Power Consumption (Without Cooling): ~50 W
Dimensions: Height 1500 mm, Width 730 mm, Depth 650 mm
Tray Loading Capacity: ≈ 3
5Kg / Tray
Maximum Non-Condensed Humidity: %90
External Operation Temperature
:
-
20 ̴ +70 ̊
C
For Energy Efficiency please keep unused parts of your machine closed. Before adjusting
temperature levels of the
Midi Buffet STD
®
with Cooling Unit, please consider the
requirements. Extreme cooling should not be used unnecessarily.
6.
TRANSPORTATION AND INSTALLATION
The Vending Machine has to be protected from all means of physical damages and
has to be in Vertical Position during transportation process. If for any reason there
will be a change in the upright position of the Vending Machine, all necessary precautions have to
be taken and utmost attention has to be given to Low-E Glass Front, Product Trays and the
Cooling Unit.
Please read the User’s Manual Carefully before installation.
Please do not operate (plug in) the
Midi Buffet STD
®
min. 2 hours after placing the
machine at the installation site. The cooling unit liquid has to settle down.
Remove the packaging and the protective foam between the trays.
Power Cable, Keys (3) and Decorative Pallet Skirt (to hide the pallet if the vending machine
will be used on the pallet) are placed in the Product Dispense Chamber.