1.
Place the laundry in the drum, one item
at a time, shaking them out as much as
possible.
2. Close firmly the door. You must hear a
click during closing.
Warning!
Do not embed the
laundry between the door and the
rubber joint.
Measure out the detergent and the
fabric softener
Your new appliance was designed to re-
duce water, energy and detergent consump-
tion.
1.
Pull out the dispenser drawer until it
stops. Measure out the amount of deter-
gent required, pour it into the main
wash compartment
and, if you wish
to carry out the
prewash
phase, pour
the detergent into the compartment
marked
.
If you wish to perform the
stain
func-
tion, pour the stain remover into the com-
partment
marked with an arrow.
2.
If required, pour fabric softener into the
compartment marked
(the amount
used must not exceed the
MAX
mark in
the drawer).
Close the drawer gently.
Select the temperature (button 2)
Press this button repeatedly to increase or
decrease the temperature, if you want your
laundry to be washed at a temperature dif-
ferent from the one proposed by the appli-
ance.
The maximum temperatures for each wash-
ing programme can be checked in the para-
graph «Washing programmes».
The symbol of cold wash corresponds to
.
Select the spin speed, Night Cycle or
Rinse Hold option (button 3)
When the required programme has been se-
lected, your appliance automatically propo-
ses the maximum spin speed provided for
that programme.
Press this button repeatedly to change the
spin speed, if you want your laundry to be
spun at a speed different from the one pro-
posed by the appliance.
RINSE HOLD : by selecting this option the
water of the last rinse is not emptied out to
prevent the fabrics from creasing.
NIGHT CYCLE : by selecting this option,
the machine will not drain the water of the
last rinse, so as not to wrinkle the laundry.
As all spinning phases are suppressed, this
washing cycle is very noiseless and it can
be selected at night or in times with a more
economical power rate. On some pro-
40
electrolux
