Service
Manual
9406
Repair instructions
The contactor fails to make or break
•
Check that the operating coil is energised. If this is
the case, take measurements at the coil to check
for a break. If a break has occurred, replace the
coil as follows.
•
Undo the contactor and lift it out.
NOTE! The connection cables to the contacts do
not need to be removed.
•
Price apart the spring brackets and carefully take
the contactor halves apart; be carefully so that the
movable contacts do not jump out.
•
Loosen the connections to the coil.
•
Replace the coil.
•
Prior to reassembly, check that the contact
surfaces to the magnet core are clean and
undamaged.
•
Reassamble and replace the contactor.
The contactor hums considerably
•
Loosen and take the contactor apart as described
above.
•
Check whether or not the screen windings are
intact. A damaged screen winding causes a loud
hum. If this is the case, replace the contactor.
•
Check for foreign particles on the contact surfaces
of the magnet core. Clean carefully with a fine
emery cloth if necessary.
The contactor sticks
•
Undo and take the contactor apart as described
above.
•
Check that there are no burrs on the coil bobbin
which brake the motion of the movable contactor
halt. Where necessary, deburr.
•
Check that the movable contact bridge can move
freely in the contactor housing and that the
movable contacts are correctly seated in their
holders.
Other contactor faults
•
Replace the contactor.
25
25. Contactor
2
Содержание FLE120
Страница 1: ...Service Manual FLE120 FLE220 471 1553 11 ...
