Electrolux EKK915AAOX, Руководство пользователя и инструкция по установке

Страница: 8 / 56

8 www.electrolux.com
Once set the AUTO symbol will turn off
and the
O
N
B
V
U
P
symbol, for manual operation,
will turn on.
Minute counter (from 0.01 to 0.59 =
hh,mm)
Press push button 1 and select cooking
time with push button 5 or 6. The
symbol turns on. At the end of the set time
the buzzer will go off and the symbol
turns off.
Semi-automatic operation
(with cooking time from 0.01 to 23.59
= hh,mm)
By pressing push button 2 and setting the
length of cooking time with push button 5
or 6, the AUTO and symbols will light up
and stay on all the time. At the end of the
set time the
O
N
B
V
U
P
symbol will turn off, the
AUTO symbol will flash and the buzzer will
go off.
Semi-automatic operation
(with end of cooking time from 0.01 to
23.59 = hh,mm)
By pressing push button 3 and setting
the end of cooking time with push button
6, the AUTO and symbols will turn on
and stay on all the time. At the end of the
set time the
O
N
B
V
U
P
symbol will turn off, the
AUTO symbol will flash and the buzzer will
go off.
O
N
B
V
U
P
1 2 3 4 5 6
Automatic operation
(with the start of cooking time
delayed)
First programme cooking time (both
the AUTO and
O
N
B
V
U
P
symbol will turn on)
and then the end of cooking time (the
O
N
B
V
U
P
symbol will turn off) as described
previously. The
O
N
B
V
U
P
symbol will turn on
again when baking in the oven starts. At
the end of cooking time the
O
N
B
V
U
P
symbol
will turn off, the AUTO symbol will flash
and the buzzer will go off.
Manual operation
Manual operation is only possible when
the automatic programming has finished
or after having cancelled it by pressing
push button 4. The AUTO symbol
disappears and the
O
N
B
V
U
P
symbol turns on.
Buzzer
The buzzer will go off at the end of a
programme or at the end of the minute
counter function and lasts about 7
minutes. The buzzer can be stopped by
pressing one of the function push buttons.
Programme start and control
The programme starts after setting. The
programme set can be controlled at any
time by pressing the corresponding push
button.
Correcting/cancelling the programme
setting
An automatic function programming
error will occur if the time shown on the
clock is between the cooking start time
and cooking end time. This error will be
signalled immediately by a buzzer and the
AUTO symbol will flash. A setting error
can be corrected by altering the duration
or end of cooking time. Any programme
that has been set can be corrected at
any time by pressing the corresponding
programming key and then key 5 or 6.
To cancel a programme, correct the
time set bringing it to a value of “0.00”.
If functioning time is cancelled the end
of functioning is cancelled too and vice
versa. The oven turns off automatically
and the AUTO symbol flashes. Press
key 4 to set the programmer on manual
operation. The right time cannot be
corrected when the automatic operation
programme is working.