Electrolux EKG501102, Руководство пользователя, Страница: 19 / 24

electrolux
19
no air
correct
adjusting
excess of
air
Hob burners
To adjust the minimum level:
•
Light the burner
•
Turn the knob to the position of the
minimum flame;
•
Remove the knob;
•
Unscrew or screw the by-pass screw
(on the right above of tap shaft or below
of tap shaft) until a regular small flame is
reached.
•
For LPG screw completely the by-pass
screw.
Reassemble the parts following the same
procedure in reverse.
Check that, when turning the knob quickly
from the maximum position to the minimum
one, the flame does not go out.
Replace the nozzles of the oven burners
To replace the gas oven nozzle, follow this
procedure:
•
Check the table no.1 for diameter of
nozzle;
•
Remove the oven removable base
panel A;
•
Remove the screw B on the oven
burner;
•
Remove the oven burner by pushing it
backwards.
•
Replace the nozzle "C" by means of a
No 10 socket spanner;
Reassemble the parts following the same
procedure in reverse.
Grill burner
To replace the gas grill nozzle, follow this
procedure:
•
Remove the grill burner after removing
the fixing screw.
•
Replace the nozzle by means of a No
10 socket spanner;
Refit all parts and test .
Flame adjustment
Oven burner
The burner is correctly adjusted when the
flame is stable, silent and goes out without
any noise.
•
When the flames are too short, the
nozzle is whistling or the flames have the
tendency to detach from the burner, it
means that there is too much air in the
valve. If there is too much air there is a
risk that the flames will extinguish.
•
But, if the flames are too long, soft,
lighting, there is not enough air in the
valves. These flames discolour the
bottom of pans.
•
Loosen the fixing screw M.
•
Move the air adjuster A forward or
backward until achieving the right
mixture;