Electrolux EKG501102, Руководство пользователя, Страница: 15 / 24

electrolux
15
Accessories Shelf
Backing tray
Grill deflector
Dimensions Height
Width
Depth 850 mm
500 mm
500 mm
Advice for safety
Gas connections
•
Before installation ensure that the local
distribution conditions (gas type and
pressure) and the pre-setting of the
appliance are consistent.
•
This appliance must be installed only in
a room with good ventilation.
•
This appliance must not connected to a
chimney. It has to be installed and
connected in accordance with the rules
in force. Special attention should be
paid to the applicable disposal
concerning ventilation.
•
The adjacent furniture panels have to
be heat proof or protected by such
material.
•
The adjusting conditions of this
appliance are mentioned on the rating
plate.
Connection to gas supply.
Check that the gas flow and the diameter of
the supply pipe is sufficient to supply all the
appliances of the installation
.
•
Check that all connections are tight.
•
Install an accessible and visible gas tap
to isolate the appliance.
The manufacturing company declines
any responsibility for possible
damages resulting from an installation
that doesn't comply with the rules in
force.
Electrical connections
This cooker is designed to be connected to
a 230V 50Hz AC electrical supply.
Before switching on, make sure the
electricity supply voltage is the same as that
indicated on the rating plate.
Any electrical work required to install
this cooker should be carried out by a
qualified electrician or competent
person, in accordance with the current
regulations.
This cooker must be earthed.
Check on the rating plate the value for the
total connection power for establishing the
fuse power.
Fuse capacity: max 10 A
If the supply cable is damaged, it
must be replaced by the manufacturer
or its service agent or a similarly
qualified person in order to avoid a
hazard.
Before connecting check that:
The plug used for connection is easily
accessible when the appliance is installed.