Electrolux EKG501102, Руководство пользователя, Страница: 13 / 24

electrolux
13
If the door glass panel becomes chipped or
has deep scratches, the glass will be
weakened and must be replaced to prevent
the possibility of the panel shattering.
Contact your local Service Centre who will
be pleased to advise further.
Hob
After every use wipe with a soft cloth well
wrung out in warm water to which a little
washing up liquid has been added, avoiding
any leakage through the holes of the hob.
Rinse and dry with a soft cloth.
To remove more stubborn stains, wet and
leave to dissolve, do not scratch and avoid
the use of abrasive or caustic products that
could damage the enamel.
Burners
The burner caps and crowns can be
removed for cleaning.
Wash the burners caps and crowns using
hot soapy water, and remove marks with a
mild paste cleaner. A well-moistened soap
impregnated steel wool pad can be used
with caution, if the marks are particularly
difficult to remove.
After cleaning, be sure to wipe dry with a
soft cloth.
Glass lid
This should be cleaned with a soft cloth
soaked in warm detergent water. Do not use
abrasive scourers or steel wool.
Oven lamp replacement
Ensure that the appliance is switched
off before replacing the lamp to avoid
possibility of electric shock.
If the oven bulb needs replacing, it must
comply with the following specifications:
Electric Power: 15W
Electric Rate:
230V (50Hz)
Resistant to temperatures of: 300ºC
Connection Type:
E14
To replace the faulty bulb.
•
Turn the glass cover anticlockwise and
remove.
•
Remove the faulty bulb and replace
with a new one.
•
Refit the glass cover.
Reconnect the appliance to the electricity
supply.
Something not working
If the appliance does not work properly,
check the following points before asking for
service; there could be simple problems that you could remedy by yourself; if not, contact
your after Sales Service.
Symptoms Solutions
No burner ignition Check:
Gas supply is completely open
The position of gas pipe is correct
The burner is not wet
The burner cap and ring burner have been
replaced correctly after cleaning