Electrolux EBC65, Руководство пользователя

Страница: 16 / 28

16 17 www.electrolux.com
Support
Pin
If the brewing unit is difficult to
insert, you must first adapt it to
the right dimensions by pressing it
forcefully from the bottom and top
as shown in the figure.
7. Once inserted, make sure the two red
buttons have snapped out.
8. Replace the drip tray and waste cof-
fee container.
9. Close the service door.
17.9 Cleaning the milk
container
IMPORTANT!
Always clean the tubes inside
the milk container (C) when you
prepare milk.
If there is still milk in the container, do not
leave it out of the refrigerator for longer
than strictly necessary.
Clean the container each time you pre-
pare milk as described in Note 3 in the
section “Making cappuccino”.
All components can be washed in a dish-
washer, placing them in the top basket of
the dishwasher.
1. Turn the lid of the milk container
clockwise then remove it.
2. Remove the milk spout and intake
tube.
spout
milk intake
tube
Groove
Frothed milk regulator
hole
hole
3.
Remove the frothed milk regulator by
pulling it outwards.
4. Wash all the components thoroughly
with hot water and mild washing-up
liquid.
Make sure there are no milk residues
left inside the holes and the groove
on the fine end of the frothed milk
regulator.
5. Check that the intake tube and spout
are not clogged with milk residues.
6. Replace the frothed milk regulator,
milk spout and intake tube.
7. Replace the milk container lid.