manualshive.com logo in svg

Electrolux E30GF74GPS - 30" Pro-Style Gas Range, Техническое и сервисное руководство, Страница: 29 / 96

Поделиться
Скачать
Electrolux E30GF74GPS - 30

29

Setting broil

The “Oven” selector knob controls the Broil feature. 

When broiling, heat radiates downward from the oven 
broiler for even coverage. The Broil feature tempera-

ture is 500°F (260°C).

The broil pan and insert used together allow dripping 

grease to drain and be kept away from the high heat 

of the oven broiler. 

DO NOT 

use the broil pan without 

the insert. 

DO NOT cover the broil pan insert with 

foil. 

The exposed grease could catch fire.

To set the oven to broil:

1. 

  Place the broiler pan insert on the broiler pan.  

 

Then place the food on the broiler pan insert. 

DO  

 

NOT 

use the broiler pan without the insert. 

DO 

 

NOT 

cover he broiler insert with foil. The 

 

exposed grease could catch fire.

2. 

  Arrange the interior oven rack and place the 

 

broiler pan on rack. Be sure to center the broiler  

 

pan is directly under the broil burner. If 

 

preheating the broil  burner first, position the   

 

broiler pan with food after 

 

 

3. 

  Turn selector knob to Broil.

The oven light will remain on until the selector knob 

is turned to the off position or the temperature control 

knob is turned to the off position.

bROILING TIPS

The broiling pan and its insert allow dripping grease 

to drain and be kept away from the high heat of the 

broiler.

NOTE

DO NOT use the broiler pan without its insert. DO 
NOT cover the broiler pan insert with foil. The 
exposed grease could ignite.

broiling Times

Use the following table for approximate broiling times. 
Increase or decrease broiling times, or move the broiling 

pan to a different rack position to suit for doneness. If 

the food you are broiling is not listed in the table, follow 

the instructions provided in your cookbook and watch 

the time closely.

 CAUTION

Should an oven re occur, turn off the oven. If the 

re continues, throw baking soda on the exposed 

re or use re extinguisher. DO NOT put water or 

flour on the re. Flour may be explosive.

Содержание E30GF74GPS - 30" Pro-Style Gas Range

































































































Отзывы:

Нет отзывов