Electrolux Automower Скачать руководство пользователя страница 51

Страница: 51 / 56

electrolux

automower

Trouble shooting

Outside

If this occurs in isolated areas it may
be due to interference from metallic
objects (perimeter fence,
reinforcement bar) or buried cables in
the vicinity.

Try moving the boundary wire.

The working area slopes too much.

Check that the boundary wire has
been routed correctly.

The boundary wire has been routed
the wrong way around an ”island”.

Check that the boundary wire has
been routed in accordance with the
installation instructions.

The boundary wire is too close to the
edge of the working area.

Check that the boundary wire has
been routed correctly.

Low battery voltage

Automower™ cannot find the
charging station.

Change the position of the charging
station.

The battery is defective.

Contact your dealer to replace the
battery

Wrong PIN code

Wrong PIN code has been entered.
Three attempts are permitted, the
keypad is then blocked for five
minutes.

Enter the correct PIN code.

No drive

Automower™ has got caught in
something.

Free the mower and rectify the reason
for the lack of drive. If it is due to wet
grass, wait until the lawn has dried
before using the mower.

No contact in
charging station

The Automower™ makes poor
contact with the contact strips in the
charging station.

Check that the Automower™ has
docked correctly in the charging
station.

Charging station
blocked

The contact between the charging
strips and contact strips may be poor
and the Automower™ has made a
number of charging attempts.

Place the Automower™ in the
charging station and check that the
charging strips and contact strips
make good contact.

An object is obstructing the
Automower™

Remove the object.

Stuck in charging
station

An object is preventing the
Automower™ from reversing out of
the charging station.

Remove the object.

Upside down

The Automower™ leans too much or
has turned over.

Turn the mower the right way up.

Battery empty

The Automower™ is set in MAN
operating mode.

This behaviour is normal; no action
required.

Fault message

Cause

Action

Содержание Automower

























































Результаты поиска

Содержание Automower

Отзывы:

Бренды по названию

Популярные бренды

Electrolux Automower, Руководство оператора

Результаты поиска

Содержание Automower

Отзывы:

Бренды по названию

Популярные бренды