Electrolux Automower, Руководство оператора

Страница: 36 / 56

36 electrolux automower
Menu functions
Check loop (3-4)
This function allows you to check the mower’s signal
reception from the boundary wire, and to determine
exactly where in the lawn the boundary wire is routed.
The sensor used for this function sits concealed
directly under the catch button for the cutting height
adjustment cover. The sensor detects the position of
the Automower™ in relation to the loop. ”Inside”,
”Outside” or ”No loop signal” are shown on the display.
If the mower is inside the loop, ”Inside” is shown, etc. If
the mower is set with sound on, a constant beep is also
heard when the mower is outside and a pulsating beep
when it cannot detect a signal. If the mower is inside
the loop no beep is heard.
To:
• Check the signal reception: Move the cursor to
”Check loop” and press YES.
• Find wire: Move the Automower™ over the outer
edge of the working area and select ”Check loop”.
Repeat until you find the boundary between ”Inside”
and ”Outside”. You now know where the wire is.
Garden examples
By adjusting the exit settings to the garden it is easier
for Automower™ to reach all parts of the garden and
thereby achieve better mowing results. Adjusting the
settings for the garden shape also improves the
mowing results.
Different gardens require different settings. A few
suggestions are given below.
Garden
shape (3-3) Exit settings (3-1)
Open Exit settings (3-1): Default
(3-1-1).
Exit settings
Drive past wire
Garden shape
Check loop
3-4
3012-421