50
electrolux
automower
Trouble shooting
Trouble shooting
Fault messages
A number of fault messages are listed below that can
be shown on the display. If another message than
those listed is shown, contact your dealer.
Fault message
Cause
Action
Left wheel motor
blocked
Grass or other object has wrapped
around the drive wheel.
Check the drive wheel and remove
the grass or other object.
Right wheel motor
blocked
Grass or other object has wrapped
around the drive wheel.
Check the drive wheel and remove
the grass or other object.
Blade disc blocked
Grass or other object has wrapped
around the blade disc.
Check the blade disc and remove the
grass or other object.
Installation lock
PIN code in charging station and
mower are not the same.
Place the mower in the charging
station and enter correct PIN code.
No loop signal
The transformer is not connected to
the mains supply or its miniature
circuit-breaker has tripped.
Check the wall socket connection and
whether the miniature circuit-breaker
has tripped.
Reset the miniature circuit-breaker by
removing the transformer’s power
cord from the wall socket, wait 10
seconds and then reconnect the
power cord in the wall socket again.
Boundary wire broken.
Check the signal given by the LED on
the charging station. If it flashes the
loop is damaged. Repair the broken
cable using an original waterproof
coupler, part number 535 13 37-01.
If this occurs in isolated areas it may
be due to interference from metallic
objects (perimeter fence,
reinforcement bar) or buried cables in
the vicinity.
Try moving the boundary wire.
If it occurs in the vicinity of an ”island”
it may be due to the boundary wire
routed in the wrong direction around
”island” and thereby switching off the
signal.
Check that the boundary wire has
been routed correctly.
Trapped
Automower™ has got caught in
something.
Free the Automower™ and rectify the
reason for it getting trapped.
Содержание Automower
Страница 1: ...Automower Operator s Manual ...
Страница 4: ...4 electrolux automower ...
Страница 55: ......