Technical Support - A.D.L.
43/83
599 74 12-51 Rev.00
10.3 Washing unit
WASHING UNIT
Type
Load capacity (cottons)
Drum volume
max.
C4
6 kg
42 litres
The washing unit is made up of:
A stainless steel drum (4) inserted inside a
carboran tub (5) with a welded cover (3).
2 counterweights are positioned to the sides
(2 and 6) needed to reduce the swinging caused
by the clothes during washing.
The drum is held in position by 4 bearings fitted
to the tub and held by a support (1).
The washing unit is held suspended by two spiral
springs (7) fitted to the back panel, the swinging
is muffled by two shock absorbers (8) one to the
front and one at the back of the tub and fitted to
the base frame.
The drum inserted in the washing unit is made up of
2 flanges (9) clamped to a perforated cylinder (14)
with an open part (inlet) and in correspondence with
the inlet there are 2 tilted lids (13) fitted to this
cylinder using 2 pivots (12).
Inside the drum we can find 3 spokes 2 the same
(10) and one bigger and heavier (11) positioned at
180° from the inlet, the latter serving to compensate
the weight of the 2 lids.
