1
Hotplate control knob
•
Adjusts temperature of
hotplate.
•
Can be rotated in either
direction.
2
Dual ring hotplate
control knob
•
Adjusts temperature of
hotplate.
•
When rotated anti-
clockwise it uses the inner
ring only.
•
When rotated clockwise
both rings are used.
3
Function indicator lamp
•
Comes on when you
select a function.
4
Function knob
•
Turns oven light and
cooling fan on.
•
Sets the function you
want.
•
Note: you must use the
oven temperature control
knob as well to use
cooking functions.
5
Oven indicator lamp
•
Comes on when oven
temperature knob is
turned on.
•
Turns off when oven
reaches set temperature.
•
Cycles on and off
automatically when you
are baking.
6
Oven temperature
control knob
•
Sets temperature for
rapid heat, fan forced,
bake, base heat, defrost,
turbo grill, grill and maxi
grill.
•
Note: You must select the
function you want before
you set the temperature.
7
Electronic clock
•
Shows time of day.
•
Sets automatic cooking
duration and end time.
•
Sets minute minder.
8
Cooling Fan Vents
1
G E N E R A L I N F O R M AT I O N A B O U T Y O U R C O O K E R
4
The controls
Before using your cooker, compare the controls in this diagram with the control panel of
your cooker. Check your model number on the control panel.
Multi-function electric oven with ceramic hotplate and programmable clock
Model No 6633
General safety warnings
• Do not let children play with the oven.
• Do not let children or infirm people use the oven, if you are not with them.
• Do not use the oven as a heater.
• Do not spray aerosols near the oven, when it is turned on.
• Do not keep flammable materials in or near the oven eg chemicals, aerosols etc.
• Do not block oven air vents, because this can cause a fire.
• Keep oven clean. A dirty oven can cause a fire.
• Be careful not to touch hot surfaces, eg oven door.
Preparing your appliance for the first time
Please remove all stickers and leaflets from the floor of the oven before operation.
Please wipe out the oven interior prior to operation with warm soapy water and polish dry
with a soft clean cloth. Do not close the oven door until the oven is completely dry.
New appliances have a smell during first use. It is recommended to operate the oven empty
at a temperature of 180°C for approximately 4 - 8 hours to eliminate the smell of the
adhesive used in the insulation. Please ensure the room is well ventilated during this
process.
