25
ENGLISH
In particular, make sure to periodically check correct
operation of all the safety devices and the insulation of
electrical cables, which must be replaced if damaged.
I4
Improper use
Improper use is any use differing from that specified in
this manual. During appliance operation, other types of
work or activities considered improper and that in gen-
eral can involve risks for the safety of operators and
damage to the system are not allowed.
Improper use includes:
•
failure to disconnect the power supply with the main
switch in “O” off position before carrying out adjust-
ment, cleaning, resetting and maintenance opera-
tions;
•
failure to disconnect the power supply with the main
switch in off position “O” at the end of the day;
•
lack of appliance maintenance, cleaning and peri-
odical checks;
•
structural changes or modifications to the operating
logic;
•
tampering with the guards or safety devices;
•
failure to use personal protection equipment by
operators, specialized technicians and mainte-
nance personnel;
•
failure to use suitable accessories (e.g. use of
equipment, ladders, etc., unsuitable for carrying out
maintenance on equipment positioned inside the
appliance);
•
keeping combustible or flammable materials, or in
any case materials not compatible with or pertinent
to the work, near the appliance;
•
incorrect appliance installation (see chapter E
“Installation and assembly”);
•
placing in the appliance any objects or things not
compatible with washing or that can obstruct/dam-
age the appliance or persons or pollute the environ-
ment;
•
non-compliance with the requirements for correct
appliance use;
•
other actions that can cause risks not eliminable by
the Manufacturer.
I5
Residual risks
The appliance has several risks that were not com-
pletely eliminated from a design standpoint or with the
installation of adequate protection devices.
Nevertheless, through this manual the Manufacturer
has taken steps to inform operators of such risks, care-
fully indicating the personal protection equipment to be
used by them.
Sufficient spaces are provided for during the appliance
installation phases in order to limit these risks.
To preserve these conditions, the corridors and areas
around the appliance must always be:
•
kept free of obstacles (e.g. ladders, tools, contain-
ers, boxes, etc.);
•
clean and dry;
•
well lit.
For the Customer’s complete information, the residual
risks remaining on the appliance are given below; such
actions are to be considered incorrect and therefore
strictly forbidden.
APPLICATION PHASE:
I=Installation, U=Normal use,
M=Maintenance, P=Cleaning.
Table 3
Residual risks
IMPORTANT!
Appliance maintenance operations
must only be carried out by specialized
Technicians provided with all neces-
sary personal protection equipment
(safety shoes, gloves, glasses, over-
alls, etc.), tools, utensils and suitable
ancillary means.
WARNING!
Never operate the appliance by remov-
ing, modifying or tampering with the
guards and protection or safety
devices.
IMPORTANT!
Before carrying out any operation on
the appliance, always consult the man-
ual which gives the correct procedures
and contains important information on
safety.
RESIDUAL
RISK
DESCRIPTION OF HAZARDOUS SITU-
ATION
Slipping or
falling
[ U - M ]
The operator can slip due to water or dirt
on the floor.
Burns
[ U - M - P ]
The operator deliberately or unintention-
ally touches some components inside the
appliance or dishes at the outfeed without
using gloves or without allowing them to
cool.
Electrocution
[ M ]
Contact with live parts during mainte-
nance operations carried out with the
electrical panel powered. The operator
intervenes (with a power tool or without
disconnecting the power to the appliance)
lying down on the wet floor.
Falling from
above
[ I - U - M ]
The operator intervenes on the appliance
using unsuitable systems to access the
upper part (e.g. rung ladders, or climbs
on it).
Tipping of
loads
[ I - M ]
During maintenance on the appliance or
the packing containing the appliance with
the use of unsuitable accessories or lift-
ing systems or with load unbalanced.
Chemical
[ I - U - M - P ]
Contact with chemical substances (e.g.
detergent, rinse aid, scale remover, etc.)
without taking adequate safety precau-
tions. Therefore always refer to the safety
cards and labels on the products used.
Crushing or
shearing
[ I - U - M ]
Possible risk of injury to upper limbs
during the door closing operation.
