background image

9

ENGLISH

Figure 4 Example of document identification data.

The Manufacturer declines any liability for damage and 
malfunctioning caused by:

non-compliance with the instructions contained in 
this manual;

repairs not carried out in a workmanlike fashion, 
and replacements using spare parts different from 
those specified in this manual (the fitting and use of 
non-original spare parts and accessories can nega-
tively affect appliance operation);

operations by non-specialized technicians;

unauthorized modifications or operations;

inadequate maintenance;

improper appliance use;

unexpected extraordinary events;

use of the appliance by uninformed and untrained 
personnel;

non-application of the current provisions in the 
country of use, concerning safety, hygiene and 
health in the workplace.

The Manufacturer declines any liability for damage 
caused by arbitrary modifications and conversions car-
ried out by the user or the Customer.

The employer or workplace manager is responsible for 
identifying and choosing adequate and suitable per-
sonal protection equipment to be worn by operators, in 
compliance with current regulations in the country of 
use.

Electrolux Professional S.p.A. declines any liability for 
possible inaccuracies contained in the manual, if due 
to printing or translation errors. 

Any supplements to the instruction manual the Cus-
tomer receives from the Manufacturer must be kept 
together with the manual, of which they will form an 
integral part.

B8

Personal protection equipment for use and 
maintenance

Give below is a summary table of the Personal Protec-
tion Equipment (PPE) to be used during the various 
stages of the appliance’s service life.

(*) During Normal use, gloves protect hands from the 
contact with chemical substances, water and hot sur-
faces.

Failure to use the personal protection equipment by 
operators, specialised technicians or users can involve 
exposure to chemical risk and possible damage to 
health.

B9

Keeping the manual

The manual must be carefully kept for the entire life of 
the appliance until decommissioning.

The manual must stay with the appliance in case of 
transfer, sale, hire, granting of use or leasing.

B10

Users of the manual

This manual is intended for:

the carrier and handling personnel;

installation and start-up personnel;

the employer of appliance users and the workplace 
manager;

operators in charge of normal appliance use;

specialized technicians - technical assistance (see 
wiring diagram and service manual).

DOC. NO.  

5956.6J5.00

EDITION: 1

04.2015

Month

Year

Edition

Number

Document

Stage

Protective 

garments

Safety foot-

wear

Gloves

Glasses

Safety 

helmet

Transport

Handling

Unpacking

Assembly

Normal use

X (*) 

Adjustments

Routine 
cleaning

X (*) 

Extraordinar
y cleaning

Maintenance

Dismantling

Scrapping

Key:

PPE REQUIRED
PPE AVAILABLE OR TO BE USED IF 

NECESSARY

PPE NOT REQUIRED

Содержание 506062





























Отзывы: