39
4. MACHINE DISPOSAL
ATTENTION!
DISMANTLING OPERATIONS MUST BE
CARRIED OUT BY QUALIFIED PERSONNEL.
ATTENTION!
WORK ON THE ELECTRICAL EQUIPMENT
MUST ONLY BE CARRIED OUT BY A QUALIFIED
ELECTRICIAN, WITH THE POWER SUPPLY
DISCONNECTED.
4.1 WASTE STORAGE
At the end of the product’s life-cycle, make sure it is not
dispersed in the environment.
Special waste materials can be stored temporarily while
awaiting treatment for disposal and/or permanent storage.
In any case, the current environmental protection laws in the
country of use must be observed.
4.2 PROCEDURE REGARDING APPLIANCE DISMANTLING
MACRO OPERATIONS
Before disposing of the machine, make sure to carefully
check its physical condition, and in particular any parts of the
structure that can give or break during scrapping.
The machine’s parts must be disposed of in a differentiated
way, according to their different characteristics (e.g. metals,
oils, greases, plastic, rubber, etc.). Different laws are in force
in the various countries, therefore comply with the provisions
of the laws and competent bodies in the countries where
scrapping takes place. In general, the appliance must be
taken to a specialised collection/scrapping centre. Dismantle
the appliance, grouping the components according to their
chemical characteristics, remembering that the compressor
contains lubricant oil and refrigerant fluid which can be
recycled, and
that the refrigerator components are special waste assimilable
with urban waste.
The symbol
L
placed on the product indicates that
it should
not be considered as domestic waste, but must
be correctly disposed of in order to prevent any negative
consequences for theenvironment and the health of people.
For further information on the recycling of this product, contact
the local dealer or agent, the after-sales assistance service
or the local body responsible for waste disposal.
ATTENTION!
Make the appliance unusable by removing the
power cable.
ATTENTION!
When scrapping the machine, the “CE”
marking, this manual and other documents
concerning the appliance must be destroyed.
5. ENCLOSED DOCUMENTATION
• Set of test and inspection documents
• Wiring diagram
• Installation diagram
AUSTRALIA
For service and spare parts, please contact:
Electrolux - Tom Stoddart Pty Ltd
Zanussi - JL Lennard Pty Ltd
