26
1.6 MACHINE AND MANUFACTURER’S IDENTIFICATION DATA
A reproduction of the marking or dataplate on the machine
is given below:
GAS
AB
N
AB
N
EL.
AB
N
AB
N
The meaning of the various information given on it is listed
below: ...
F.Mod ...................................... actory description of product
Comm.Model .......................... commercial description
PNC ........................................ production number code
Ser.No .................................... serial number
El:.........~ ................................ power supply phase
Hz: .......................................... power supply frequency
kW:.......................................... max. power input
A. ............................................ current absorption
Power unit El.: ......................... power
I .............................................. dust and water protection rating
CE ........................................... CE marking
AB ........................................... gas safety certificate number
N ............................................. certification group
0051........................................ notified body
EN 203-1 ................................ EU standard
L.............................................. Logo INQ/GS
Cat .......................................... Gas Category
Pmbar ..................................... Gas pressure
Electrolux Professional SPA
Viale Treviso, 15
33170 Pordenone
(Italy) ............................................Manufacturer
When installing the appliance, make sure the electrical
connection is carried out in compliance with that specified
on the dataplate.
ATTENTION!
Do not remove, tamper with or make the
machine “CE” marking illegible.
ATTENTION!
Refer to the data given on the machine “CE”
marking for relations with the Manufacturer (e.g.
when ordering spare parts, etc.).
ATTENTION!
When scrapping the machine, the “CE” marking
must be destroyed.
1.7 APPLIANCE IDENTIFICATION
This manual contains instructions relevant to various ap-
pliances.
See the appliance dataplate located under the control panel to
identify the appliance product code.
1.8 COPYRIGHT
This manual is intended solely for consultation by the operator
and can only be given to third parties with the permission of
Electrolux Professional SPA.
1.9 RESPONSIBILITY
The Manufacturer declines any liability for damage and
malfunctioning caused by:
• non-compliance with the instructions contained in this
manual;
• repairs not carried out in a workmanlike fashion, and
replacements with parts different from those specified in
the spare parts catalogue (the fitting and use of non-original
spare parts and accessories can negatively affect machine
operation and invalidates the warranty);
• operations by non-specialised technicians;
• unauthorised modifications or operations;
• inadequate maintenance;
• improper machine use;
• unforeseeable extraordinary events;
• use of the machine by uninformed and untrained personnel;
• non-application of the current provisions in the country of
use, concerning safety, hygiene and health in the workplace.
The Manufacturer declines any liability for damage caused
by arbitrary modifications and conversions carried out by the
user or the Customer. The employer, workplace manager or
service technician are responsible for identifying and choosing
adequate and suitable personal protection equipment to be
worn by operators, in compliance with regulations in force in
the country of use.
Electrolux Professional SPA declines any liability for any
inaccuracies contained in the manual, if due to printing or
translation errors.
Any supplements to the installation, use and maintenance
manual the Customer receives from the Manufacturer will
form an integral part of the manual and therefore must be
kept together with it.
