Electrolux Professional Clarus Vibe WH6-11, Руководство пользователя

Страница: 23 / 36

User manual
23
5.1.4 Settings
In this menu, different settings to the machine can be made. The table show some of the settings that can be
changed/set.
Language
• Default language
– Choose from the drop down list which language that shall be used as default language on the machine.
• Timeout to default
– Set the time, after which the machine returns to the set default language from any other language selected during
operation.
Date
Used to change displaying of the date.
Time
Used to change displaying of the time.
Display / Sleep timeout
The display will either be dimmed to a lower brightness or a “Welcome screen” will be shown after the set time of inactivity.
Select if the “Welcome screen” should be shown.
Note!
In the “Transfer menu”, you can upload your own welcome screen.
Programs
• Arrange
– Make programs active or inactive by dragging and dropping them between the different columns Active and Inactive. It
is only the programs listed in the column Active that will be shown in the program selection screen.
• View mode
– Select if the programs shall be displayed as a list or as a grid on the program selection screen.
– Select if the following fields shall be visible or not on the screen at the start of a program.
– Info
– Operator ID
– Batch ID
– Customer ID
– Delivery date
• End-washing consumptions
– Select if utility consumption data should be shown at the end of a wash cycle.
• Program screen timeout
– If the user has selected a program but not yet started the program, the user interface will go back to the program se-
lection screen after the time set in this menu.
• Max pause time
– Select if the time a program can be paused should be limited and in that case, set the maximum pause time.
• Region/Country and Business segment
– Select the country and one or more business segments where the machine will be used. These selections will create
an active program list with suitable factory-made programs.
Note!
If any self-service segment is selected, some of the parameters that affect how the user interface looks will
change.
• Pause, Stop and Skip / Rapid advance buttons
– Select for each button, if it should be visible during the whole program (always on), only during the regret time or if it
should not be visible at all during the program (always off).
• Regret time
– This time is counted down from the start of a program. Before this time is up it is possible to go back to the program se-
lection screen without loosing paid money (valid for coin-operated machines).