Electrolux Professional Clarus Vibe WH6-11, Руководство пользователя

Страница: 22 / 36

22
User manual
5.1.3 Pumps
In this menu you can manage dosing systems/pumps such as Dosave, Jetsave or other pumps connected to the
machine.
Pumps
Select pump type connected
• Select “Peristaltic” for Dosave (or any other dosing system or pumps connected to the digital (relay) outputs).
• Select “Venturi” for Jetsave.
– Set desired flush time.
– Set the desired clean flush time.
• Select “Manifold” for Dosave (or any other dosing system or pumps connected to the digital (relay) outputs) in combina-
tion with flush manifold.
– Set desired flush time.
Tip: Needed flush time can be calculated if you know the tube length, diameter and the flow rate.
Example:
• Flow rate: 2.2 l/min
• Tube diameter: 10 mm
• Tube length: 4.5 m
• Calculated needed flush time: 10 seconds
Note!
Check that the flush time is long enough by disconnecting the tube from the machine and make sure that water
comes at the end of the flush time. If chemicals still come at the end of the flush time the flush time must be
increased.
Chemicals
In this menu you can change the allocation of chemicals to pumps.
Tap on the chemical type (detergent/softener/bleach and so on). A drop-down list with chemical types will appear. Select the
chemical type you want to connect to the pump.
It is also possible to add branded name and a picture to each chemical type. The name and picture will then be visible under
chemicals in the “Edit program” menu and on the start program screen if selected in the settings menu.
Note!
In the “Transfer menu”, you can upload branded chemical images.
Cost
In this menu you can set the price of the chemicals for cost calculations and reports.
Priming
You must make sure that the tubes are filled with chemicals before the calibration is done. Follow the instructions on the
screen.
Calibration
Follow the instructions on the screen.
It is also possible to type in the flow rate by a long press on the value.
Tube change
Here you can note the date when the tubes have been changed.
Note!
This menu item is not active in all software versions.