Electro-Voice® Tour X Owner’s Manual
8
Rotating the Logo
All Tour X loudspeakers have logos that can be rotated (horizontally or vertically) to the user’s desired
orientation. The logo is mounted on a spacer that has the signature “backbone” notch profile of Tour X
grilles.
1. Remove the (6 or 8) screws that attach the grille to the enclosure (Figure 8).
2. Remove the (1) screw on the back of the grille that attaches the spacer to the grille (Figure 11).
3. Rotate the logo and spacer (in increments of 90°) to the desired orientation (Figure 12).
4. Reattach the spacer to the grille using the (1) screw (reverse of Figure 11). Be sure that the screw is
tight enough so as not to rattle during use, but not so tight the logo warps inward.
5. Reattach the grille using the (6 or 8) screws (reverse of Figure 8).
Figure 11:
Removing the Screw from
the back of the Grille
Figure 12:
Rotating the Logo and Spacer to
the Desired Orientation
Logo and
Logo Spacer
Logo Spacer
Screw
Loudspeaker
Grille
