Electro-Voice® Tour X Owner’s Manual
7
Rotating the Horn on TX1152 and TX2152
The TX1152 and TX2152 loudspeakers have horns that can be rotated to change the coverage pattern.
The coverage pattern angles are indicated on the horn flange.
1. Remove the (6 or 8) screws that attach the grille to the enclosure (Figure 8).
2. Remove the (12) screws that attach the horn to the enclosure, and disconnect the wires that attach the
compression driver to the input panel (Figure 9).
3. Rotate the horn 90° to the desired vertical coverage pattern (Figure 10).
4. Reconnect the wires that attach the compression driver to the input panel (reverse of Figure 9). The
yellow wire corresponds to the positive terminal, and the yellow and black wire corresponds to the nega-
tive terminal. Reattach the horn to the enclosure using the (12) screws.
5. Reattach the grille using the (6 or 8) screws (reverse of Figure 8).
Figure 8:
Removing the Grille from
the Enclosure
Figure 10:
Rotating the Horn to
Desired Horn Pattern
Figure 9:
Removing the Horn from
the Enclosure
TX1152 or TX2152
Loudspeaker
(TX1152 Shown)
Loudspeaker
Grille
Grille Screw
(x6) or (x8)
Horn Screw
(x12)
Horn/
High-Frequency
Subassembly
