Electro-Voice® Tour X Owner’s Manual
9
TX-W1 Wheel Kit for TX1181 and TX2181
The TX1181 and TX2181 loudspeakers have (6) mounting points for the TX-W1 Wheel Kit on their rear
panels. The TX-W1 Wheel Kit is made up of (2) skid plates with (2) castors on each skid plate. When
mounted on the rear of a TX1181 or TX2181, they can greatly reduce setup time and virtually eliminate
the need to carry subwoofers.
1. Remove the (6) screws on the rear of the TX1181 or TX2181 loudspeaker (Figure 13).
2. Align the (3) holes at the top of the loudspeaker with the (3) holes of the skid plate. Install (3) screws
back into the rear of the TX1181 or TX2181 loudspeaker. Repeat this step at the bottom of the loud-
speaker, ensuring all (6) screws are tight (Figure 14).
Figure 13:
Removing the (6) Screws from the Rear
of a TX1181 or TX2181 (shown)
Figure 14:
Attaching the TX-W1 and (6) Screws to the
Rear of a TX1181 or TX2181 (shown)
Wheel Kit
Mounting
Screw
(x6)
TX1181 or TX2181
Loudspeaker
(TX2181 Shown)
Wheel Kit
Mounting
Screw
(x6)
TX1181 or TX2181
Loudspeaker
(TX2181 Shown)
TX-W1 Wheel Kit
(Bottom Skid Plate)
TX-W1
Wheel Kit
(Top Skid
Plate)
