background image

Electro-Voice® Tour X Owner’s Manual

Important Safety Instructions

Tour X Series Owner’s Manual

Table of Contents

1. Read these instructions. 

2. Keep these instructions. 

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water. 

6. Clean only with a dry cloth.

The lightning flash with arrowhead symbol, within an equilateral 
triangle is intended to alert the user to the presence of uninsu-
lated “dangerous voltage” within the product’s enclosure that 
may be of sufficient magnitude to constitute a risk of electric 
shock to persons.

The exclamation point within an equilateral triangle is intended 
to alert the user to the presence of important operating and 
maintenance (servicing) instructions in the literature accompa-
nying the appliance.

The asterisk within an equilateral triangle is intended to inform 
the user to necessary installation or removal instructions re-
garding equipment or hardware use relating to the system.

Thank you for choosing the Electro-Voice® Tour X series loudspeaker system.  Please take time to con-
sult this manual so that you can understand all the features built into your EV system and fully utilize all its 
performance capabilities.

Important Safety Instructions ...........................................................................................................................................1

Tour X Series Owner’s Manual ........................................................................................................................................1

Safety First  ..........................................................................................................................................................................2

Description  ..........................................................................................................................................................................3

General System Features .................................................................................................................................................3

Suspending TX1122, TX1152, and TX2152 ...............................................................................................................3

Rotating the Horn on TX1152 and TX2152 .................................................................................................................7

Rotating the Logo ...............................................................................................................................................................8

TX-W1 Wheel Kit for TX1181 and TX2181 ................................................................................................................9

Specifications ................................................................................................................................................................... 10

Recommended Configurations ..................................................................................................................................... 12

Notes .................................................................................................................................................................................. 14

1

Содержание Tour X Series

















Отзывы: