Electro-Harmonix Forty-five thousand, Руководство пользователя

Страница: 2 / 24

TABLE OF CONTENTS
INTRODUCTION 2
QUICK START GUIDE 3
THE RECORD TRANSPORT 5
TRACKS, TRACK SELECTION AND TRANSPORT 7
ANALOG CONTROL AND I/O 9
DIGITAL I/O AND POWER 10
MEMORY CARD AND USB 10
IN-DEPTH LOOK AT RECORDING TRACKS 12
IN-DEPTH LOOK AT OVERDUBBING TRACKS 15
IN-DEPTH LOOK AT MIXDOWN 16
MIDI AND MIDI SYNC 17
MIDI NOTES & TIPS 18
USING MIDI TO CONTROL THE 45000 19
SIGNAL PATH DIAGRAM 21
©2013 Electro-Harmonix. All rights reserved. 45000 and
Electro-Harmonix and logo are trademarks of New Sensor/
Electro Harmonix. Product and company names used within
the manual are trademarks of their respective companies.
45000 Manual Version 1.0
Thank you for purchasing the
Electro-Harmonix 45000 Multi-
Track Looping Recorder. Please
read this manual in order to famil-
iarize yourself with this unique
instrument’s layout. It was written
to be a reference guide that you
can keep close by. The sound is
wonderful but the key is your cre-
ativity. The 45000 will take your
music to new creative heights.
FCC COMPLIANCE
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guaran-
tee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Modifications not expressly approved by the manufacturer
could void the user’s authority to operate the equipment
under FCC rules.