ElectrIQ eiQ-12K12KC24KWMINV, Руководство пользователя и инструкция по установке

Страница: 4 / 26

4
Energy Saving and Unit Safety Protection Tips

Do not cover or restrict the airflow from the outlet or inlet grills.

For maximum performance the minimum distance from a wall or objects should be 50cm.

Keep the filters clean. Under normal conditions, filters should only need cleaning once every four
weeks (approximately). Since the filters remove airborne particles, more frequent cleaning maybe
necessary, depending on the air quality.

For the initial start up set the fan speed to maximum and the thermostat to 4-5 degrees lower than the
current temperature. After, set the fan switch to low and set the thermostat to your desired setting.

To protect the unit we recommend not using the cooling function when the ambient indoor temperature
is higher than 35
℃
.

To protect the unit we recommend not using the heating function when the indoor ambient temperature
is lower than 7
℃
.

Note the manufacturer operating temperature ranges at the end of this user manual.
OPERATION
Cooling Mode
The compressor (6) in the exterior unit compresses the refrigerant into a high-
temperature, high-pressure gas. When this gas flows along the cooling fins of the
condenser (7), heat is exuded and the gas condenses into a liquid, which is led
to the evaporator (1) in the interior unit. The liquid expands into a gas at a low
temperature and low pressure is converted.
This gas absorbs the warmth of the air in the room, the cooled air is blown back
into the room and the heat is moved to the compressor along with the gas.
A fan (3) draws the air over the filter and blows the cooled air back into the
room. A fan (8) draws air over the condenser and blows warm air away.
1. Evaporator 2. Filter 3. Evaporator Fan 4. Gas Line 5. Liquid line
6. Compressor 7. Condenser 8. Condenser Fan
Heat Pump Mode
The system operates in reverse: the condenser works as an evaporator, the evaporator as a
condenser: warm air is blown into the room. It is ideal as a maintenance heating when outside
temperature is not too low and when indoor temperature is more than 7°C.
Dehumidifying
As with cooling, the moisture in the air condenses on the cold evaporator at room temperature acting
as a powerful dehumidifier.
NOTE:
This is a multisplit system so multiple indoor units are connected to an outdoor compressor. Please make
sure indoor units are set to operate in same mode. You cannot operate 2 indoor units connected to a
single compressor outdoor simultaneously in cooling and respective heating mode but you can set 2
different target room temperatures as long they are set in the same mode. Fan only mode can be operated
in combination with cooling or heating.