![ElectrIQ DESD10L Скачать руководство пользователя страница 9](http://html1.mh-extra.com/html/electriq/desd10l/desd10l_user-manual_2379400009.webp)
8
Dehumidification Level
Controls Keys
(2)
Use the key
(2)
to select between continuous mode
and 40-70% humidity
If no selection is made the unit will work with pre-set to 50%RH which is the
recommended setting
Continuous mode
humidistat is disabled, unit will dry until set time or tank full
Humidity set to
40% RH;
set to achieve room humidity of around 40% good for
quick drying boost on initial run or emergencies, not recommended for long
normal operation in domestic environment
Humidity set to
50% RH;
recommended setting, great for domestic operation and
dry storage
Humidity set to
60% RH;
great for personal comfort and applications where 50%
RH is considered too dry
Humidity set to
70% RH;
ideal for unoccupied properties or where economical run
is needed without the need to go drier than 70% RH
Indicator led lights
(5) Quiet mode
lighten when quiet low fan mode is selected
(6) Turbo mode
lighten when turbo high fan mode is selected
(7) Laundry mode
lighten when laundry mode is selected
(8) Humidity and timer display
two digits led display shows room humidity
(35-95%RH) or set timer
(9) Humidity selection
shows 40% 50% 60% 70% and continuous mode
according to key
(2)
selection
(10) Timer on led light
lighten while stopping timer is in operation off if the
timer is not activated
(11) Power on led light
Lighten continuously is unit is operating normally
The led indicator will blink intermittently when the unit is tipped over or
when the unit is turned off but the fan continues to operate for few
minutes to dissipate the heat and empty the desiccant disc
(12) Tank Full led light
red light on if tank full and required to be emptied of
is not pushed in correctly
NOTES:
This unit is equipped with tilt protection. When the unit is tilted will stop automatically,
the POWER indicator will turn into RED and the unit will beep 3 times. After repositioning the
unit, press
Power
key to restart.
DESD10L has intelligent self-diagnosis. If the humidity sensor, heating element or tip-over device
is out of function, the unit will beep 3 times, the POWER indicator would turn RED and the unit
will turn OFF.