10
Setting the Stopping Timer
On selecting stopping timer key
(3)
the 2 digits LED display will cycle
through 1-24 showing the number hours after which the
dehumidifier will stop. The displayed time will revert to humidity
display 8 seconds after selection was made.
When selecting '4 hours' for example the unit will stop operating
after 4 hours with selected humidity / fan settings. Tank full before
the selected time will stop the unit. This setting is ideal for drying
laundry. No selection made will mean the unit operates
continuously subject to tank full stopping the unit earlier.
Press timer key again at any time to cancel or change the timer
settings
Setting the Dehumidification level
Start the unit and leave it for 5-10 minutes on automatic selection
mode (50%RH) until the humidistat is able to read correctly the
humidity in the room.
Press dehumidify level key
(2)
to select the desired humidistat
controls from continuous operation to 40% 50% 60% 70%.
While pressing the selection key
(2)
the corresponding indicator
(9)
cycles the humidistat set range for this unit from 40% through 50%
70%, 60% back to continuous mode.
Intelligent dehumidification and power saving
Your ElectrIQ dehumidifier features an intelligent micro CPU that
ensure maximum water extraction with minimum power use for the
selection made.
The unit will try to maintain humidity level selected in the room by
turning off the heating element when the desired humidity is
reached. Note that according to the space where the unit is used,
obstacles in the direct flow, extra humidity being added at any time,
settings selected, as well as other environmental factors the results
may vary.
