11
Operational Advice
1.
Plug to power, press ON/OFF key to turn-on the machine; press
ON/OFF key again to turn-off the dehumidifier.
2.
Make sure water-tank is placed/ fitted correctly. If the water tank
is not fitted/placed correctly the 'water full'
(12)
light
will
turn on and the machine will not operate.
3.
When the dehumidifiers first starts, default humidity setting is set
to 50% RH.
4.
When unplugging from the wall socket use one hand to hold the
plug and the other hand against socket to avoid power cord
damage.
Warning: Using poor quality sockets, extensions or overloading
the circuits may cause damage to the machine or may start a fire.
5.
When switching OFF the machine, do not simply unplug the unit
from the socket - ensure you turn off the machine properly before
unplugging. After dehumidifiers is OFF, the fan will keep running
for a couple of minutes and heat will be produced to dry the
dehumidifier.
Tilt Protection
Your ElectrIQ dehumidifier was designed with safety in mind. When unit is
tilted it will be shut down to minimize safety risk or damage. Please do not use
if the unit is tilted by mistake for a day or two until the internals are completely
dried. Consult the service centre if in any doubts
