13
CARE AND MAINTENANCE
Always shut off the unit and unplug from the mains before cleaning or performing any maintenance. When it
is not in use for long periods it is advisable to remove the plug from the power socket. Do not use chemical
solvents (such as benzene, alcohol or gasoline) as they may cause irreversible damage to the unit.
1. CLEAN THE GRILLE AND CASE
Use water and a mild detergent to clean the
washable mesh filter. Do not use bleach or
abrasives. Do not splash water directly onto the
main unit. Doing so may cause an electrical shock
and can lead to the insulation to deteriorate, or
cause the unit to rust. The air intake and outlet
grilles get soiled easily, so use a vacuum
attachment or soft brush to clean. Wipe the
dehumidifier body with a soft damp cloth or kitchen
towel.
Remove the filter housing. If the optional filters are fitted, remove them from the frame and hoover gently
approximately every 2-3 weeks.
If the mesh filter is dirty hoover it, if it is heavily soiled wash it with warm soapy water and dry thoroughly
before reinserting it in the unit. When filter cleaning is finished and filters are dry placed them back into the
unit. The optional filters should be replaced every 3
– 6 months.
NOTE:
While the HEPA and Carbon filters are optional, never run the unit without the mesh filter housing
correctly inserted.
2. CLEAN THE WATER TANK
Every few weeks, clean the tank to prevent growth of mould, mildew and bacteria. Partially fill the tank with
clean water and add a little mild detergent. Swish it around and than empty the tank and rinse.
NOTE:
Do not use a dishwasher to clean the tank. After cleaning and drying, the tank must be reinserted
securely into dehumidifier in order to restart operation.
END OF SEASON MAINTENANCE
1.
Empty and clean the water tank.
2.
Clean the unit and the filters as per cleaning procedure above.
3.
Coil the power cord on the special cord storage rest at the back of the unit.
4.
Cover the unit and keep it in a dry place.
