Setting up the Security Console
Setting up the Security Console
Setting the clock
1. To access the menu, press either the
menu upp
or
down button
. The display now shows ENTER PIN.
2. Enter your 4-digit PIN code (factory setting 0000 see page 12 for changing the PIN code).
The display is
cleared and shows a * for each number entered.
3.When the PIN code has been entered correctly, the word INSTALL will show upp on the display.
4. Use the menu bottons
upp
or
menu down
to go to menu item 2. SET CLOCK. Press OK to select this menu
item. You can also go to this menu item directly by pressing a 2 on the number pad.
5.Use the menu buttons
upp
or
down
to select the correct day of the week.
6.Use the number pad to enter the new time (24 hour notation), followed by OK. The display now reads INSTALL.
7. Press CLEAR again to quit the menu. To confirm your chice, press 1 for Yes or 2 for No. If you choose Yes, you
will quit the menu. If you choose No, you go back to the first menu item.
If you press CLEAR while entering the time, the time entered will be deleted.
Storing phone numbers
The console has a built-in telephone dialler. In case of an alarm up to 6 telephone numbers can be dialled. All
persons called will be able to listen to the message you have recorded (see page 8). The message needs to be
confirmed by the person answering the phone by pressing a 0 on their phone (DTMF response). The dialler then
knows the next numbers does not need to be called.
First make a list with the phone numbers you want to enter, in the order they need to be dialled. If you have
connected the console via an PABX phone system, you may need to add a 0, or possible other digit in front of the
telephone number to get an external land line.
1. To access the menu, press either the
menu upp
or
down
button. The display now shows ENTER PIN.
2.r
Enter your 4-digit PIN code (factory setting 0000 see page 12 fo
changing the PIN code
)
The display is cleared
and shows a * for each number entered.
.
3.When the PIN code has been entered correctly, the word INSTALL will displayed.
4.Use the menu buttons
upp
or
down
to go to menu item 3. PHONE NUMS. Press OK to select this menu item.
You can also go to this menu item directly by pressing a 3 on the number pad.
5.Use the menu buttons upp/down to go to the memory space where you want to enter a telephone number
(PHONE 1, PHONE 2 _ PHONE 6).
6.Press OK when you have arrived at the memory space. After pressing OK at PHONE 1, the display will read
SET PH 1.
7. Enter the telephone number. Press the OFF button for a dial pause (use a dial pause between the extra 0 and
the telephone number when the console is connected to a PABX phone system. A small letter p can now be
noticed on the display).
8. Press OK. You will now automatically go to next memory space.
9. Press CLEAR again to quit the menu. To confirm your choise, press 1 for Yes or 2 for No. If you choose Yes,
you will quit the menu. If you choose No, you go back to the first menu item.
If you press CLEAR while entering a telephone number, the number entered will be deleted.
.
I
MPORTANT:
It’s mandatory to have all 6 positions programmed. It’s allowed to program the same number on
different locations., But be aware if you program less than 6 different telphone numbers, the console will try to
contact you at these numbers several times in case of an alarm. As soon as the call is confirmed by a DTMF “0”
press, the console will stop dialling.
Recording your own message
You can record an own message that will be used by the telephone dialler. The message can be up to 12 seconds
long. Make sure the message is not too short, because this will cause a long silence period when the message is
played and repeated.
Example: “This is the security system of .... Press 0 after the message to hear what is going on. Please undertake
action as agreed.”
1.To access the menu, press either the menu upp or down button. The display now shows ENTER PIN.
2.
Enter your 4-digit PIN code (factory setting 0000 see page 12 for changing the code). The display is cleared
and shows a * for each number entered.
3.When the PIN code has been entered correctly, the word INSTALL will show up on the display.
4.Use the menu buttons upp/down to go to menu item 4. MESSAGE. Press OK to select this menu item. You can
also go to this menu item directly by pressing a 4 on the number pad.
5. Press 1 for RECORD.
6.The display now shows PLEASE WAIT. When the display reads SPEAK NOW you can record your message
(max 12 seconds). The distance to the microphone should be around 30cm.
7.After recording, wait until the RECORD/REPLAY option comes up again. Press 2 (REPLAY) to listen to the
recorded message..
8. Press CLEAR to quit the menu. To confirm this choise, press 1 for Yes or 2 for No. If you choose Yes, you will
quit the menu. If you choose No, you go back to the first menu item.
8
