at ACC-PTT IN as well as at the front and rear-panel PTT jacks.
PL$
(PL/CTCSS Tone Mode and Number)
SET/RESP format:
PL$nnm; where nn = 01 to 50 (see table), and m = 0 (off) or 1 (on).
CTCSS TONE TABLE (Hz):
#01-09:
67.0, 69.3, 71.9, 74.4, 77.0, 79.7, 82.5, 85.4, 88.5
#10-19:
91.5, 94.8, 97.4, 100.0, 103.5, 107.2, 110.9, 114.8, 118.8, 123.0
#20-29:
127.3, 131.8, 136.5, 141.3, 146.2, 151.4, 156.7, 159.8, 162.2, 165.5
#30-39:
167.9, 171.3, 173.8, 177.3, 179.9, 183.5, 186.2, 189.9, 192.8, 196.6
#40-50:
199.5, 203.5, 206.5, 210.7, 218.1, 225.7, 229.1, 233.6, 241.8, 250.3, 254.1
NOTE:
Tone numbers (shown as #nn above) are not standardized by the EIA/TIA; they
vary by manufacturer. The K4's
PL
command uses them only as a monotonic table index.
PM
(Panadapter Mode) [TBR - Internal command]
SET/RESP format:
PMn; where n = 1 for single padapter, 2 = dual panadapter.
PO
(Power Output) [Pending]
RESP format:
POnnnn; where nnnn is current TX power output in tenths of a watt.
SET format:
POn; where n is 1 for automatic delivery. 0 is to turn off automatic delivery.
Also see
TM
command, which provides real-time updates of all TX metering without
polling.
PP
(Per-band power) [Pending].
TBD.
PS
(Power On/Off Control)
SET/RESP format:
PSn; where 0 = off, 1 = on.
PS0; Power off
PS8; Restart (TBD)
PS9; Standby (TBD)
TBD. The SBC supports wake-on-LAN from standby mode.
