Maintenance
Before maintenance, remove the gel pad from the main unit.
■
Gel pad maintenance
Clean the gel pad in any of the following cases:
•
The gel pad cannot be securely fixed
•
Weak stimulation during use
•
Tingling in skin during use
•
Dirty gel pad
•
The gel pad cannot be fixed to the storage sheet
Maintain the gel pads after every 30 times of use.
If the stimulation is still weak or your skin tingles after
maintenance, replace the gel pad.
■
Main unit maintenance
•
Wipe dirt off the main unit with a soft cloth.
CAUTION:
Do not let water get into the main unit or USB port.
After use
27
①
Run a small amount of water on the surface and rub it gently with
your fingertips for several seconds.
※
Do not pour on too much water. Otherwise, the viscosity would reduce
and the contact surface to be bonded would be damaged.
②
Hold it by the grip and shake it sufficiently to remove
excess water and let it air dry.
※
If not dried thoroughly, adhesion decreases.
※
Do not wipe the adhesive surface with a tissue or cloth.
※
Avoid direct sunlight.
