Eldes EPIR3, Руководство пользователя

Страница: 44 / 124

44 44 EN
EPIR3 User Manual v1.3
4. HOW TO PROGRAM THE SYSTEM USING YOUR MOBILE PHONE
NOTE: The system supports a flexible SMS text message management replies.
In order to configure and control the EPIR3 system using SMS text message, send the text command to the phone
number of EPIR3 from one of the pre-programmed user numbers.
ESSENTIAL INFORMATION FOR PROGRAMING VIA YOUR MOBILE PHONE
• The underscore symbol ‘_’ in these instructions represents a space. So when following instructions and ty-
ping an SMS text message, replace the underscore symbol with a single space.
• Similarly, ‘XXXX’ means password.
• Make sure you don’t leave any spaces at the beginning or end of the message.
• If you receive the message “wrong syntax” please check your message and try again.
Main Settings
Function Command Value Range / Comment Example
Change
the SMS
password
0000_PSW_XXXX XXXX = [0001... 9999]
All SMS text message commands start with
a password, so be sure to change the default
password to a memorable number. It must be
a four digit number – anything except four
zeros. Non-numerical characters such as
dots, colons and spaces are not allowed.
0000_PSW_1111
Add or
change
a single
user phone
number
XXXX_NRn:
+441700XXXX111
or XXXX_NRn:
00441700XXXX111
or XXXX_
NRn:01700XXXX111
NRn = [NR1... NR10]
The EPIR3 alarm system allows you to enter up
to ten different mobile numbers to gain access
to and control the system. User 1 number is
mandatory - all the others can be skipped.
All numbers must be entered in one of the
following formats:
• International (with plus) – The phone
numbers starting with plus and an interna-
tional country code in the following format:
+[international code][area
1111_
NR1:+44321XXXX4
NOTE: The underscore symbol ‘_’ in these instructions represents a space. So when typing an SMS text
message, replace the underscore symbol with a single space.