Eldes EPIR3, Руководство пользователя, Страница: 122 / 124

122 122 EN
EPIR3 User Manual v1.3
User Manual v1.3
Valid for EPIR3 v01.02.00 and up
(later referred to as ‘the EPIR3’, ‘the system’, ‘the device’ ‘the unit’ or ‘the detector’)
Please read and follow these safety guidelines to safeguard yourself and others:
•
DO NOT use the system where it can interfere with other devices - such as medical devices
•
The alarm system radio transceiver operates in the GSM850, GSM900, GSM1800 and GSM1900 bands
•
DO NOT use the system in hazardous environments
•
DO NOT expose the system to high humidity, chemical environments or mechanical impact
• DO NOT attempt to repair the system yourself - any repairs must be carried out by fully qualified personnel only
The EPIR3 comes with its own power supply unit so you can plug it in straight away. The unit is not
meant for outdoor use, i.e. you should use it inside a building and the power supply must be plugged
into a standard Euro 2-pin socket or UK 3-pin socket (depending on the version you have bought). The
main circuit should be protected by short circuit or over-current protection.
Please use the power supply unit which comes with your EPIR3, as it meets the EN 60950-1 standard.
Any additional device you connect to the system, such as a computer, must also be powered by an
EN 60950-1 approved supply.
Disconnect the mains power before installing. Never install or carry out maintenance during stormy
weather. The electric socket that powers the system must be easily accessible. In case of power cut,
the system is powered by a back-up battery.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO THE INSTRUCTIONS. TAKE CARE WHEN CONNECTING POSITIVE AND NEG-
ATIVE BATTERY TERMINALS.
To switch the system off, unplug the external electric power supply and disconnect the battery by
first removing the front cover of the device. A blown fuse cannot be replaced by the user. The replace-
ment fuse has to be of the kind indicated by the manufacturer (fuse F1 model – MINISMDC050F 0.5A;
fuse F2 model - MINISMDC020F 0.2A).
If you use a computer to select your ideal settings, it must be earthed.
The WEEE (Waste Electrical and Electronic Equipment) symbol on this product (see left) means it must
not be disposed of in household waste. To prevent possible harm to human health and/or the environ-
ment, you must dispose of this product in an approved and environmentally safe recycling facility. For
further information contact your system supplier, or your local waste authority.